HERITAGE KOKORO 7 Spoke Heart WheelSet

Other heart wheels ----> https://shopmmr.com/hot-wheels-sk-forged-moni-5-spoke-heart-real-riders-wheels-rims-tires-set-1-64/?showHidden=true&ctk=1e08d52e-6157-4429-b61d-b548e0e6943d

1 Wheel set is for 1 car.

1 Wheel set includes 1 axle set which includes 2 axle tubes, 4 axle pins, 4 wheels (2 regular and 2 deep dish) , 4 tires of your choice; leave a note saying which tires you want on which wheels, see tire comparison picture.

NOTE: These are built when ordered (already painted), so ordering these may delay your order.

If you want a set with all regular or all deep dish, let me know by leaving a note! (while supplies last)

These are 2 Piece wheels, barrels + face and will come glued unless you tell me you want them unglued by leaving a note!

Mix and Match different barrel colors with different faces or paint the face as you wish then use a bit of super glue to lock them together!

These are limited edition wheels that will no longer be restocked.

I cannot guarantee these wheels will roll perfectly when assembled.

If you want me to mix barrel / face colors for you just let me know in a note!

Sizes: These are the same size as regular size real riders such as TE37, new 10 Spoke, new 5 Spoke.

Tires: Choose any tires for the same price, can do staggered tire sizes as well, just leave a note when you purchase!

While supplies last, you can choose from:

A: Regular size SQUARE tires in main picture, same size as regular size real riders such as TE37, new 10 spoke, new 5 spoke

B: Regular size STRETCH tires like on my v2 wheels, these have a more rounded edge and can be pushed back for rim to poke. Available in:

---Black

---White

C: Regular size STRETCH LETTERED tires like on new 10 spokes with letters, same look as type B but with tire letters, available with:

---ADVAN Yokohama

---BFGoodrich Radial T/A

---Nitto NT555

---Hoosier

D: Small size ULTRA THIN tires for very low cars, rim will poke a bit

E, F, G, H: Large size TREAD tires like on my 5 Spoke Deep Dish and Star wheels but once installed on these wheels, size will be large so will only work staggered setups or on trucks like C10 which have more room for taller tires. Available with:

----Blank Black

----Blank White

----Goodyear Eagle

----idlers (once per tire)

----Red Line

----White Line

I, J: Gasser size SLICK tires available with:

----Goodyear

----Hoosier

----Blank

K: Gasser size SLICK THICK tires (slightly taller than I, J)

---Goodyear Eagle

---Blank

L: Gasser size SLICK PIECRUST tires (slightly taller than I, J)

----Hoosier

----Blank

M: Regular size OFFROAD tires like on 8 Hole offroad real riders

N: Regular size OFFROAD SUBTLE tires similar to M but with more subtle tread pattern

O: Large size OFFROAD BIG tires like 5 Spoke Muscle Big Offroad real riders.

----BFGoodrich Radial T/A

----Blank

Want colored tire letters? or a different color line tire? Use sharpies over printed tire letters or white line, just lightly tape until full painted.

Get creative and do rainbow tire letters if you'd like!

Want different tire letters than what is available? Use my tire letter decals: https://www.ebay.com/itm/193186920558

Get creative and you can also do white lines in between letters or flares with my tire letter flare decal set.

Install backwards with printed side touching tire, let it dry, and you can tint tire letter decals with sharpies easily, just lightly tap letters until fully painted, no need to be exact as the sharpie ink is really only visible on white

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

HOW TO INSTALL:

Drill method:

1) Drill out base rivets with roughly a 9/64" drill bit.

2) Take car apart.

3) Pry open / remove base tabs holding in original wheel axles.

---for plastic bases, you can easily pry them open with small flathead screwdriver, or just snap them off with blade/wire cutters.

---for metal bases, you may be able to snap them off with wire cutters (careful as this will send the tab flying across the room!) if you cannot remove the tab entirely, you will need to use dremel disc to grind off the rest of tab. 

---if you don't care about the stock wheels/axles, you can also just bend them out to easily cut the axle with wire cutters

4) Replace wheels/axles

---if the custom wheels don't fit because axle is too short/long, you will need to adjust custom axle sets, see below.

5) Reassemble car.

---If you didn't overdrill, the base might just snap back together, otherwise you will need to lay car on it's roof and add some super glue onto the posts where the rivets used to be, or use some epoxy putty.

Optional: Lower car's ride height by sanding down the interior that holds the axles.

No Drill method:

1) Cut stock axles with wire cutter.

---you may need to bend the axles down to have room to cut them

2) Use custom axles: 

---1. Bend axle pins about 10-15 Degrees with pliers

---2. Insert bent pin into axle tube (if it won't go in, you've bent it too much, unbend a bit and try again, if it slides out too easily, bend it more)

---3. Insert 1 wheel into axle tube

---4. Feed axle tube with wheel through car's base

---5. Insert another wheel into axle tube on the other side of car/axle

---6. Insert bent axle pin into axle tube to lock in the wheels

3) Adjust as needed.

---if axle tube is too long: uninstall axle and trim with dremel disc and try again

---if axle tube is too short (rare): pull out axle pins slightly

---if there is play in the wheels, add spacers to fill in the gaps from wheel to base (you can make your own or use my 3D printed spacers for an easier time)

Note: if you don't use drill to open car, you can't lower the car's ride height.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------