Customize your Hot Wheels Lamborghini Huracan with confidence knowing the lights will be perfect with these decals!
Need to fix your stock Huracan? If needed, simply scratch off original tampos (headlight decals) with a blade very lightly, then install these decals!
1 sheet is enough for up to 2 cars.
Tinted headlights require the white base first for the color to show as intended.
Stock headlights require black base first. Or you can just leave the black layer on for a blacked out look.
Transparent headlights can be used as a single layer headlight decal for custom color headlights!
Note: These decals were designed to fit on the Hot Wheels Huracan Super Trofeo but they also sort of fit the regular Hot Wheels Huracan. The headlights are basically the same size but the taillights are slightly different, the super trofeo has a flat taillight area while the regular huracan has a trench around the taillights so you'll want to leave some extra decal film (dont cut super close to edge of printed taillights) so that you can bridge that trench essentially.
Note: These decals also sort of work the Tomica and Maisto Huracan castings!
NOTE: Sample cars NOT included with purchase. Only decals for sale. See digital preview.
-----------------------------------------------------------------------------------------------------------------------------
HOW TO INSTALL:
1) Cut out around print as close as you can / feel comfortable doing. Use sharp scissors or blade
2) Float on water for 15+ seconds
-decals are waterproof but it's alot easier if you just float them with print facing up to easily take them out the water
3) Lightly wet area where decal will be placed so it can slide around easily
4) Transfer decal from blue decal paper onto car with soft brush, cotton swab, or finger
-a soft brush that is semi dry will easily slide smaller decals off the backing paper and onto brush to then transfer onto car
5) Position as needed with brush or very gently with smooth end toothpick
6) Absorb excess water with dry brush. Gently push out water from underneath decals.
7) Optional but recommended: Clear coat entire car after adding decals for protection.
Pro tip: Use Micro Set and Micro Sol for better results...
-apply some Micro Set liquid to area first, then transfer decal (try not to transfer too much water onto car)
-Micro set is supposed to help decal stick to surfaces more easily (such as panel lines)
-apply micro sol over decal to help it lay flat more easily (especially useful for complex surfaces or wrapping around edges)
-be careful as micro sol will make decal more fragile, do not use too much, do not use if not needed
-not needed for install but may help you
Recommended: Once decals have been installed, wait at least 4 hours before adding Clear coat over entire car for protection.
Avoid handling car or decal with oily fingers as they can cause weird results with clear coat!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SHIPPING INFO: for wheels and decals
Flat rate shipping: Doesn't matter how much you buy, same shipping price!
USA: $4.99 (automatically free on orders over $49)
Canada: $9.99 ($5 automatic discount on orders over $49)
International: $12.99 ($5 automatic discount on orders over $49)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow me on Social Media for updates on Restocks and New Releases!
Any questions, feel free to ask :)
