1/64 Scale Race Bucket Seats
1 bundle comes with 4 seats for 1-4 cars depending on how many seats used per car.
2 size options as it can vary from car to car.
To install, remove original seats first by:
1) Drill a hole through the original seat if needed to then:
2) Use a blade or jeweler's knife blade to precisely cut around the seat
3) Check if seat fits
4) Cut more if needed or clean up the edges you cut with a blade.
Tips: If you cut just enough, the seat can be inserted with pressure and glue will not be needed.
If seat is too low, either use the bigger size or place the seat higher by placing some sort of block underneath it to raise it as needed. or just glue it at a higher position. Can use crazy glue, hot glue, epoxy putty, or anything else you desire but you may want to test it first on the bottom of seat to make sure your glue doesnt react with seat material and cause hazing / color imperfections (this test applies to any thing you ever want to glue for a scale model, to be safe)
Make sure the windows can still sit flush onto the interior part so that the rest of car can be put back together without issue.
Individual pictures for each color and size option coming soon.
Seat brand logo sheets coming soon!
Made from biodegradable thermoplastic which is made from renewable resources like corn starch or sugarcanes!